Mills & Nebraska Architectural Products

    Multifamily door solutionsMay 2024

    Edgewood Oaks Apartments, Phases 1 to 3

    Tampa, FL

    Edgewood Oaks Apartments, Phases 1 to 3 is an apartment community in Tampa, FL. It is part of the Mills & Nebraska project portfolio, completed May 2024.

    Aerial view of a garden-style apartment community with three-story buildings, a pool and a landscaped entry drive in the Tampa, Florida area

    About the project

    Edgewood Oaks Apartments is a multifamily community built in three phases in the Tampa, Florida area. Mills & Nebraska's project list shows a May 2024 completion.

    What openings in apartment communities typically require

    General requirements for this building type under the codes and standards that commonly apply. They are not a list of the products supplied on this project; each opening follows the project's drawings, hardware schedule and code review.

    • Fire-rated, self-closing unit entry doors where units open onto interior corridors, under the Florida Building Code and NFPA 101.
    • Fair Housing Act design requirements in covered dwelling units, with any required accessible units following ICC A117.1 or the 2010 ADA Standards.
    • Exterior unit and common-area doors with Florida Product Approval for wind and, where the site is in a wind-borne debris region, impact resistance.
    • Panic hardware on amenity spaces such as clubhouses where the assembly occupant load reaches 50 or more, per Florida Building Code Section 1010.2.9.

    Planning an apartment community project?

    Send us your drawings or hardware schedule. Our team responds within 24 business hours with submittals and Florida code requirements for your openings.